smok pen

Tips On How To Extend Smok Pen Recharge Time

The Smok Pen is really a new pen that was created by two guys in California. They wanted to create a cool writing instrument that looked like a real pen but had the opportunity to smoke a hookah. They named their product the Smok Valve and the Smok Pen. The Smok Valve has had the marketplace by storm.

The Smok Pen includes a built quality that is just great. I came across that even though it is an electronic pen the build quality is simply as good as the pens that I’ve reviewed. It is because of how they made the most notable cap. You don’t need to worry about the cap cracking or breaking on you Smok Valve Pen.

Both biggest differences that separate the Smok Valve from other pens may be the form of the coils and the way that they are built. Generally the coil on a Smok Pen is larger than on other pens. I think that they did this on purpose, to make the pen feel more substantial.

Invest the a glance at a Smok Pen, you will notice that your body of the pen is round and not smooth like other pens. On the trunk of the pen there exists a little tab that houses the coil. When you press on the tab you can easily turn the heating element on / off. I must say i liked this feature since it allows me to utilize the Smok Pen 22 whenever Personally i think like smoking.

To utilize the Smok Pen you must keep the heat button pressed. Once the button is pressed, the heating element will begin to warm up. Once it gets to the appropriate temperature it is possible to switch off the heating element. Smok recommends using a 22mm tank. I prefer a more substantial tank, but that’s just me.

Once you put your Smok Pen in to the tank you will notice a indicator light come on. The indicator light will remain green unless you put your Smok Pen into the Smok Pen charger. Once your Smok Pen has entered the charger the indicator light will turn red. It is important to always put your pen in to the charger before you apply the e-liquids to the coil heads. Additionally it is important to do this before putting your e-liquids into the coil heads.

After you have completed this step, it is best to check to see in case you are at the right temperature for the coils to fire. If not then you should turn the energy off and try again. In case you are still not satisfied together with your Smok Pen i quickly suggest you take it in for some troubleshooting. This is what I would call the “troubleshooting process” Vape because sometimes things just usually do not work as they should. I suggest that you perform the next two steps, then go on and check the Smok Pen to see if it still has the electronic charging port.

Prior to going any further you should take away the battery from your own pen and unscrew the magnetic cap. You need to then take away the plastic sleeve that holds the sub-ohm. There exists a wire that runs through the Smok’s body which is green in color. You should loosen this wire using pliers. When you have loosened this wire you can then access the sub-ohm. You need to then remove the wire from the Smok’s body and carefully insert it into the Smok pen’s electrical port, being careful to not touch any of the coils.

When you have placed the sub-ohm tank in to the pen you need to then place the rest of the components including the wattage, the batteries and the heating element into the included microwaveable microwave oven. Turn on the power and follow the on screen instructions. You need to place the pen’s battery into the microwave and activate the setting. You need to then wait approximately 30 seconds before turning it back off. When you initially put the pen in to the microwave the electronic reading will show a minimal voltage protection setting. If this setting will not automatically get set you then should follow the on screen instructions.

After the Smok Pen has reached the temperature that it needs to reach you should then connect both wires to the negative and positive on the positive post on the Smok unit. You need to then connect the other end of the battery to the negative post on the negative side of the Smok unit. The ultimate step is to connect the positive cable to the bottom of the Smok’s power switch.

After all of the components have been placed in to the pen, you should turn the energy on. After the first test run, you ought to be able to start to see the battery life indicator light seriously. If you do not see any sign of life from the Smok Pen, you need to remove the battery from the pen and replace it with a fresh one. For your convenience gleam green light that can be pressed to be able to confirm the battery charging status. When you have done these things and you also do not see the green light indicating charging, you need to replace the battery.